Preferred bug tracker

Please visit the preferred bug tracker to report your issue.

This queue is for tickets about the Time-HiRes CPAN distribution.

Report information
The Basics
Id:
70186
Status:
resolved
Priority:
Low/Low
Queue:

People
Owner:
Nobody in particular
Requestors:
david [...] channelmeter.com
Cc:
AdminCc:

BugTracker
Severity:
(no value)
Broken in:
(no value)
Fixed in:
(no value)



Subject: CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Tue, 9 Aug 2011 23:35:40 -0700
To: bug-Time-HiRes@rt.cpan.org
From: David Storrs <david@channelmeter.com>
On OSX 10.6.8 (Snow Leopard) on an MBP 4-core i7 machine, installing Time::HiRes and several other modules under a perl-5.14.1 installed from perlbrew into /opt/perlbrew: sudo cpanm Time::HiRes The cause of failure appears to be this 'wrong architecture' message. /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. $ file ...the filepath shown above... [filepath] Mach-O 64-bit bundle x86_64 Here is the relevant part of the build log: Searching Time::HiRes on cpanmetadb ... --> Working on Time::HiRes Fetching http://search.cpan.org/CPAN/authors/id/Z/ZE/ZEFRAM/Time-HiRes-1.9724.tar.gz -> OK Unpacking Time-HiRes-1.9724.tar.gz Entering Time-HiRes-1.9724 Checking configure dependencies from META.yml Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.57_05) Configuring Time-HiRes-1.9724 Running Makefile.PL Configuring Time::HiRes... Have syscall()... looking for syscall.h... found <sys/syscall.h>. Looking for gettimeofday()... found. Looking for setitimer()... found. Looking for getitimer()... found. You have interval timers (both setitimer and getitimer). Looking for ualarm()... found. Looking for usleep()... found. Looking for nanosleep()... testing... found. You can mix subsecond sleeps with signals, if you want to. (It's still not portable, though.) Looking for clock_gettime()... NOT found. Looking for clock_getres()... NOT found. Looking for clock_nanosleep()... NOT found. Looking for clock()... found. Looking for stat() subsecond timestamps... Trying struct stat st_atimespec.tv_nsec...found. Trying struct stat st_atimensec...NOT found. Trying struct stat st_atime_n...NOT found. Trying struct stat st_atim.tv_nsec...NOT found. Trying struct stat st_uatime...NOT found. You seem to have stat() subsecond timestamps. (Your struct stat has them, but the filesystems must help.) Checking if your kit is complete... Looks good Writing Makefile for Time::HiRes Writing MYMETA.yml Now you may issue 'make'. Do not forget also 'make test'. -> OK Checking dependencies from MYMETA.yml ... Finding PREREQ from Makefile ... Checking if you have strict 0 ... Yes (1.04) Checking if you have Test::More 0.82 ... Yes (0.98) Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.57_05) Checking if you have DynaLoader 0 ... Yes (1.13) Checking if you have Exporter 0 ... Yes (5.64_03) Checking if you have Carp 0 ... Yes (1.20) Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.57_05) Checking if you have strict 0 ... Yes (1.04) Checking if you have Test::More 0.82 ... Yes (0.98) Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.57_05) Checking if you have DynaLoader 0 ... Yes (1.13) Checking if you have Exporter 0 ... Yes (5.64_03) Checking if you have Carp 0 ... Yes (1.20) Building and testing Time-HiRes-1.9724 cp HiRes.pm blib/lib/Time/HiRes.pm /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/bin/perl /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/ExtUtils/xsubpp -typemap /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/ExtUtils/typemap -typemap typemap HiRes.xs > HiRes.xsc && mv HiRes.xsc HiRes.c cc -c -fno-common -DPERL_DARWIN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -I/opt/local/include -O3 -DVERSION=\"1.9724\" -DXS_VERSION=\"1.9724\" "-I/Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/CORE" -DTIME_HIRES_NANOSLEEP -DTIME_HIRES_CLOCK -DTIME_HIRES_STAT=1 -DATLEASTFIVEOHOHFIVE HiRes.c Running Mkbootstrap for Time::HiRes () chmod 644 HiRes.bs rm -f blib/arch/auto/Time/HiRes/HiRes.bundle env MACOSX_DEPLOYMENT_TARGET=10.3 cc -bundle -undefined dynamic_lookup -L/usr/local/lib -L/opt/local/lib -fstack-protector HiRes.o -o blib/arch/auto/Time/HiRes/HiRes.bundle \ \ chmod 755 blib/arch/auto/Time/HiRes/HiRes.bundle cp HiRes.bs blib/arch/auto/Time/HiRes/HiRes.bs chmod 644 blib/arch/auto/Time/HiRes/HiRes.bs Manifying blib/man3/Time::HiRes.3 PERL_DL_NONLAZY=1 /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'require Time::HiRes;' # at t/alarm.t line 6. # Tried to require 'Time::HiRes'. # Error: Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: # /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. # at (eval 4) line 2 # Compilation failed in require at (eval 4) line 2. &Time::HiRes::constant not defined at /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/lib/Time/HiRes.pm line 35. # Looks like you planned 10 tests but ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test exited with 25 just after 2. t/alarm.t ......... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 9/10 subtests (less 1 skipped subtest: 0 okay) # Failed test 'require Time::HiRes;' # at t/clock.t line 6. # Tried to require 'Time::HiRes'. # Error: Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: # /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. # at (eval 4) line 2 # Compilation failed in require at (eval 4) line 2. &Time::HiRes::constant not defined at /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/lib/Time/HiRes.pm line 35. # Looks like you planned 5 tests but ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test exited with 255 just after 1. t/clock.t ......... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/5 subtests Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/gettimeofday.t line 4 Compilation failed in require at t/gettimeofday.t line 4. BEGIN failed--compilation aborted at t/gettimeofday.t line 9. t/gettimeofday.t .. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/itimer.t line 14 Compilation failed in require at t/itimer.t line 14. BEGIN failed--compilation aborted at t/itimer.t line 25. t/itimer.t ........ Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/nanosleep.t line 4 Compilation failed in require at t/nanosleep.t line 4. BEGIN failed--compilation aborted at t/nanosleep.t line 9. t/nanosleep.t ..... Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run # Failed test 'require Time::HiRes;' # at t/sleep.t line 6. # Tried to require 'Time::HiRes'. # Error: Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: # /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. # at (eval 4) line 2 # Compilation failed in require at (eval 4) line 2. Bareword "Time::HiRes::time" not allowed while "strict subs" in use at t/sleep.t line 28. Execution of t/sleep.t aborted due to compilation errors. # Looks like you planned 4 tests but ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test exited with 255 just after 1. t/sleep.t ......... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/4 subtests Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/stat.t line 4 Compilation failed in require at t/stat.t line 4. BEGIN failed--compilation aborted at t/stat.t line 14. t/stat.t .......... Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run # Failed test 'require Time::HiRes;' # at t/time.t line 6. # Tried to require 'Time::HiRes'. # Error: Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: # /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. # at (eval 4) line 2 # Compilation failed in require at (eval 4) line 2. &Time::HiRes::constant not defined at /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/lib/Time/HiRes.pm line 35. # Looks like you planned 2 tests but ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test exited with 255 just after 1. t/time.t .......... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests # Failed test 'require Time::HiRes;' # at t/tv_interval.t line 5. # Tried to require 'Time::HiRes'. # Error: Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: # /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. # at (eval 4) line 2 # Compilation failed in require at (eval 4) line 2. # Looks like you failed 1 test of 2. t/tv_interval.t ... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/2 subtests Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/ualarm.t line 4 Compilation failed in require at t/ualarm.t line 4. BEGIN failed--compilation aborted at t/ualarm.t line 9. t/ualarm.t ........ Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Can't load '/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle' for module Time::HiRes: dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, 2): no suitable image found. Did find: /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: mach-o, but wrong architecture at /Users/dstorrs/perl5/perlbrew/perls/perl-5.14.1/lib/5.14.1/darwin-2level/DynaLoader.pm line 194. at t/usleep.t line 4 Compilation failed in require at t/usleep.t line 4. BEGIN failed--compilation aborted at t/usleep.t line 9. t/usleep.t ........ Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Test Summary Report ------------------- t/alarm.t (Wstat: 6400 Tests: 2 Failed: 1) Failed test: 1 Non-zero exit status: 25 Parse errors: Bad plan. You planned 10 tests but ran 2. t/clock.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 5 tests but ran 1. t/gettimeofday.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/itimer.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/nanosleep.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/sleep.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 4 tests but ran 1. t/stat.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/time.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 1. t/tv_interval.t (Wstat: 256 Tests: 2 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/ualarm.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/usleep.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=11, Tests=7, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.18 cusr 0.04 csys = 0.29 CPU) Result: FAIL Failed 11/11 test programs. 5/7 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing Time::HiRes failed. See /Users/dstorrs/.cpanm/build.log for details. -- Co-Founder, ChannelMeter.com http://channelmeter.com 415-913-7576
Subject: Re: [rt.cpan.org #70186] CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Mon, 5 Sep 2011 19:31:59 +0100
To: David Storrs via RT <bug-Time-HiRes@rt.cpan.org>
From: Zefram <zefram@fysh.org>
David Storrs via RT wrote:
Show quoted text
>dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, >2): no suitable image found. Did find: ># /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: >mach-o, but wrong architecture
That's bizarre. There was nothing in the build process to override which architecture it built for. If you get this error with Time-HiRes, I'd expect you to see the same error when installing other XS modules from CPAN. Do you? If it's unique to Time-HiRes, please show me a build log for a working XS module, similar to the log you showed me for Time-HiRes. -zefram
Subject: Re: [rt.cpan.org #70186] CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Mon, 5 Sep 2011 12:12:07 -0700
To: bug-Time-HiRes@rt.cpan.org
From: David Storrs <david@channelmeter.com>
Not a problem. I'm scrambling on a customer delivery right now, so it might be later today or tomorrow, but I'll dig it up for you. Thanks for the response. Dave On Mon, Sep 5, 2011 at 11:32 AM, Zefram via RT <bug-Time-HiRes@rt.cpan.org> wrote:
Show quoted text
> <URL: https://rt.cpan.org/Ticket/Display.html?id=70186 > > > David Storrs via RT wrote:
>>dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, >>2): no suitable image found.  Did find: >>#      /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: >>mach-o, but wrong architecture
> > That's bizarre.  There was nothing in the build process to override which > architecture it built for.  If you get this error with Time-HiRes, I'd > expect you to see the same error when installing other XS modules from > CPAN.  Do you?  If it's unique to Time-HiRes, please show me a build log > for a working XS module, similar to the log you showed me for Time-HiRes. > > -zefram > >
-- Co-Founder, ChannelMeter.com http://channelmeter.com 415-913-7576
Subject: Re: [rt.cpan.org #70186] CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Wed, 7 Sep 2011 12:08:25 -0700
To: bug-Time-HiRes@rt.cpan.org
From: David Storrs <david@channelmeter.com>
Show quoted text
> > On Mon, Sep 5, 2011 at 11:32 AM, Zefram via RT > <bug-Time-HiRes@rt.cpan.org> wrote:
>> <URL: https://rt.cpan.org/Ticket/Display.html?id=70186 > >> >> David Storrs via RT wrote:
>>>dlopen(/Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle, >>>2): no suitable image found.  Did find: >>>#      /Users/dstorrs/.cpanm/work/1312952802.461/Time-HiRes-1.9724/blib/arch/auto/Time/HiRes/HiRes.bundle: >>>mach-o, but wrong architecture
>> >> That's bizarre.  There was nothing in the build process to override which >> architecture it built for.  If you get this error with Time-HiRes, I'd >> expect you to see the same error when installing other XS modules from >> CPAN.  Do you?  If it's unique to Time-HiRes, please show me a build log >> for a working XS module, similar to the log you showed me for Time-HiRes. >> >> -zefram
Hi Zefram, Ok, you were right; it appears to be any XS module. I tried installing JSON::XS (arbitrary choice; it was the first XS module I thought of) and it failed. I've attached the build.log and it shows the same issue. Have you seen this before? Any suggestions on how to resolve it? Dave $ cpanm JSON::XS --> Working on JSON::XS Fetching http://search.cpan.org/CPAN/authors/id/M/ML/MLEHMANN/JSON-XS-2.32.tar.gz ... OK Configuring JSON-XS-2.32 ... OK Building and testing JSON-XS-2.32 ... FAIL ! Installing JSON::XS failed. See /Users/dstorrs/.cpanm/build.log for details. Log file attached. -- Co-Founder, ChannelMeter.com http://channelmeter.com 415-913-7576

Message body not shown because it is not plain text.

Subject: Re: [rt.cpan.org #70186] CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Wed, 7 Sep 2011 20:37:43 +0100
To: David Storrs via RT <bug-Time-HiRes@rt.cpan.org>
From: Zefram <zefram@fysh.org>
David Storrs via RT wrote:
Show quoted text
>Have you seen this before? Any suggestions on how to >resolve it?
No and no. It's obviously a platform-specific issue; you want to get Darwin help rather than XS help. -zefram
Subject: Re: [rt.cpan.org #70186] CORRECTED: Fails to build on OSX 10.6.8, perlbrew 5.14.1
Date: Wed, 7 Sep 2011 12:53:13 -0700
To: bug-Time-HiRes@rt.cpan.org
From: David Storrs <david@channelmeter.com>
On Wed, Sep 7, 2011 at 12:37 PM, Zefram via RT <bug-Time-HiRes@rt.cpan.org> wrote:
Show quoted text
> <URL: https://rt.cpan.org/Ticket/Display.html?id=70186 > > > David Storrs via RT wrote:
>>Have you seen this before?  Any suggestions on how to >>resolve it?
> > No and no.  It's obviously a platform-specific issue; you want to get > Darwin help rather than XS help. > > -zefram
Yep, as I figured. Ok, thanks. Dave -- Co-Founder, ChannelMeter.com http://channelmeter.com 415-913-7576


This service runs on Request Tracker, is sponsored by The Perl Foundation, and maintained by Best Practical Solutions.

Please report any issues with rt.cpan.org to rt-cpan-admin@bestpractical.com.