Skip Menu |
 

This queue is for tickets about the Gitalist CPAN distribution.

Report information
The Basics
Id: 52658
Status: resolved
Priority: 0/
Queue: Gitalist

People
Owner: Nobody in particular
Requestors: bobtfish [...] bobtfish.net
Cc:
AdminCc:

Bug Information
Severity: (no value)
Broken in: (no value)
Fixed in: (no value)



CC: slaven [...] rezic.de
Subject: Fwd: FAIL Gitalist-0.000002 amd64-freebsd 7.0-release
Date: Thu, 10 Dec 2009 22:53:40 +0000
To: bug-Gitalist [...] rt.cpan.org
From: Tomas Doran <bobtfish [...] bobtfish.net>
Download (untitled) / with headers
text/plain 2.5k
As always, you are an _absolute legend_. Thank you very much for the through and comprehensive investigation of the issue! Forwarding straight into rt.cpan.org :) Many thanks t0m Begin forwarded message: Show quoted text
> From: Slaven Rezic <slaven@rezic.de> > Date: 10 December 2009 21:31:39 GMT > To: Tomas Doran <bobtfish@bobtfish.net> > Cc: srezic@cpan.org > Subject: Re: FAIL Gitalist-0.000002 amd64-freebsd 7.0-release > Reply-To: slaven@rezic.de > > Tomas Doran <bobtfish@bobtfish.net> writes: >
>> On 8 Dec 2009, at 23:02, srezic@cpan.org wrote: >>
>>> Additional comments from tester: >>> >>> I have to kill the 03legacy_uri test, because it usually hangs on my >>> system.
>> >> >> Hi.. >> >> Thanks for the report! >> >> Can you tell me which test it hangs at, and/or provide output from >> perl running that test file, especially with the GITALIST_DEBUG >> environment variable set?
> > The first snapshot test in 03legacy_uri.t hangs. When turning > IPCRUNDEBUG on, this command was listed last: > > IPC::Run 0004 [#7(16528) git]: execing /usr/local/bin/git --git- > dir /mnt/i386/var/tmp/CPAN-build/Gitalist-0.000003-VHEIfI/t/lib/ > repositories/repo1 archive --format=tar --prefix=repo1/ > 145dc3ef5d307be84cb9b325d70bd08aeed0eceb > > and then just wait checks are following, without an end. > > It seems that Gitalist is doing something similar in > Gitalist::Git::Util::run_cmd_fh like this one-liner: > > /usr/perl5.10.1/bin/perl -MSymbol=geniosym -MIPC::Run=run -e 'for > ($in,$out,$err) { $_ = geniosym } warn run([qw(/usr/local/bin/git -- > git-dir /mnt/i386/var/tmp/CPAN-build/Gitalist-0.000003-VHEIfI/t/lib/ > repositories/repo1 archive --format=tar --prefix=repo1/ > 145dc3ef5d307be84cb9b325d70bd08aeed0eceb)], ">pipe", $out);' > > This one-liner hangs on my FreeBSD system, but not on an Linux system. > Then I just replaced --format=tar with --format=zip on the FreeBSD > system --- no hanging anymore. Then I changed the sample git > repository > with a larger one, producing a 5MB tar file on the Linux system --- it > was also hanging there! So probably it's just a question of the > system's > buffer size if this command hangs or not. If the buffer size is large > enough to hold git's output without the need to read it, then > everything > is OK. > > Maybe you have to use IPC::Run::start instead of IPC::Run::run? > > Regards, > Slaven > > -- > Slaven Rezic - slaven <at> rezic <dot> de > > tksm - Perl/Tk program for searching and replacing in multiple > files > http://ptktools.sourceforge.net/#tksm
Fixed in ffdabc0


This service is sponsored and maintained by Best Practical Solutions and runs on Perl.org infrastructure.

Please report any issues with rt.cpan.org to rt-cpan-admin@bestpractical.com.