This queue is for tickets about the BSD-Resource CPAN distribution.

Report information
The Basics
Id:
18684
Status:
resolved
Priority:
Low/Low
Queue:

People
Owner:
Nobody in particular
Requestors:
eschnoor [...] schnoor.com
Cc:
AdminCc:

BugTracker
Severity:
Important
Broken in:
1.25
Fixed in:
(no value)



Subject: perl Makefile.PL error
When I try to insatll I get the following: $ perl Makefile.PL Configuring BSD::Resource... Checking whether you have certain header files... (trying first the CC from your environment) You do have <sys/resource.h>. Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Writing Makefile for BSD::Resource Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). ~/BUP1/BSD-Resource-1.25 $ make Makefile:84: *** missing separator. Stop.
Subject: Makefile
# This Makefile is for the BSD::Resource extension to perl. # # It was generated automatically by MakeMaker version # 6.03 (Revision: 1.63) from the contents of # Makefile.PL. Don't edit this file, edit Makefile.PL instead. # # ANY CHANGES MADE HERE WILL BE LOST! # # MakeMaker ARGV: () # # MakeMaker Parameters: # DEFINE => q[ -DRlim_t=rlim_t] # LIBS => [] # NAME => q[BSD::Resource] # VERSION_FROM => q[Resource.pm] # dist => { COMPRESS=>q[gzip] } # --- MakeMaker post_initialize section: # --- MakeMaker const_config section: # These definitions are from config.sh (via /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Config.pm) # They may have been overridden via Makefile.PL or on the command line AR = ar CC = gcc CCCDLFLAGS = -fPIC CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE DLEXT = so DLSRC = dl_dlopen.xs LD = gcc LDDLFLAGS = -shared -L/usr/local/lib LDFLAGS = -L/usr/local/lib LIBC = /lib/libc-2.3.2.so LIB_EXT = .a' libc=' OBJ_EXT = ub OSNAME = linux OSVERS = 2.4.21-23.elsmp RANLIB = _ SO = so EXE_EXT = FULL_AR = /usr/bin/ar # --- MakeMaker constants section: AR_STATIC_ARGS = cr NAME = BSD::Resource DISTNAME = BSD-Resource NAME_SYM = BSD_Resource VERSION = 1.25 VERSION_SYM = 1_25 XS_VERSION = 1.25 INST_ARCHLIB = blib/arch INST_SCRIPT = blib/script INST_BIN = blib/bin INST_LIB = blib/lib INSTALLDIRS = site PREFIX = /usr SITEPREFIX = /usr VENDORPREFIX = /usr INSTALLPRIVLIB = /usr/lib/perl5/5.8.0 INSTALLSITELIB = /usr/lib/perl5/site_perl/5.8.0' installsiteman1='/usr/share/man/man1' installsiteman3='/usr/share/man/man3' installsitescript='/usr/bin' installstyle='lib/perl5' installusrbinperl='define' installvendorarch='/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi' installvendorbin='/usr/bin' installvendorhtml1='' installvendorhtml3='' installvendorlib='/usr/lib/perl5/vendor_perl/5.8. INSTALLVENDORLIB = ib/perl5' installusrbinperl='def INSTALLARCHLIB = /usr/lib/perl5/5.8.0/i386-linux-thread-multi INSTALLSITEARCH = /usr/lib/ INSTALLVENDORARCH = /usr/ INSTALLBIN = /usr/bin' installhtml1dir='' installhtml3dir='' installman1 INSTALLSITEBIN = /usr INSTALLVENDORBIN = /usr/bin' installvendorhtml1='' installvendorhtml3='' installvendorlib='/u INSTALLSCRIPT = /usr/bin PERL_LIB = /usr/lib/perl5/5.8.0 PERL_ARCHLIB = /usr/lib/perl5/5.8.0/i386-linux-thread-multi SITELIBEXP = '/usr/lib/perl5/site_perl' sit SITEARCHEXP = /usr/lib/pe LIBPERL_A = libperl.a' libc=' FIRST_MAKEFILE = Makefile MAKE_APERL_FILE = Makefile.aperl PERLMAINCC = $(CC) PERL_INC = /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE PERL = /usr/bin/perl FULLPERL = /usr/bin/perl PERLRUN = $(PERL) FULLPERLRUN = $(FULLPERL) PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" ABSPERL = $(PERL) ABSPERLRUN = $(ABSPERL) ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" FULL_AR = /usr/bin/ar PERL_CORE = 0 NOOP = $(SHELL) -c true NOECHO = @ VERSION_MACRO = VERSION DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\" XS_VERSION_MACRO = XS_VERSION XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\" PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc MAKEMAKER = /usr/lib/perl5/5.8.0/ExtUtils/MakeMaker.pm MM_VERSION = 6.03 # FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle). # BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle) # PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar) # DLBASE = Basename part of dynamic library. May be just equal BASEEXT. FULLEXT = BSD/Resource BASEEXT = Resource PARENT_NAME = BSD DLBASE = $(BASEEXT) VERSION_FROM = Resource.pm DEFINE = -DRlim_t=rlim_t OBJECT = $(BASEEXT)$(OBJ_EXT) LDFROM = $(OBJECT) LINKTYPE = dynamic # Handy lists of source code files: XS_FILES= Resource.xs C_FILES = Resource.c O_FILES = Resourceub H_FILES = MAN1PODS = MAN3PODS = Resource.pm INST_MAN1DIR = blib/man1 MAN1EXT = INSTALLMAN1DIR = /usr/share/man/man1 INSTALLSITEMAN1DIR = /usr/share/man/man1 INSTALLVENDORMAN1DIR = /usr/share/man/man1 INST_MAN3DIR = blib/man3 MAN3EXT = 3pm INSTALLMAN3DIR = /usr/share/man/man3 INSTALLSITEMAN3DIR = /usr/share/man/man3 INSTALLVENDORMAN3DIR = /usr/share/man/man3 PERM_RW = 644 PERM_RWX = 755 # work around a famous dec-osf make(1) feature(?): makemakerdflt: all .SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT) # Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that # some make implementations will delete the Makefile when we rebuild it. Because # we call false(1) when we rebuild it. So make(1) is not completely wrong when it # does so. Our milage may vary. # .PRECIOUS: Makefile # seems to be not necessary anymore .PHONY: all config static dynamic test linkext manifest # Where is the Config information that we are using/depend on CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h # Where to put things: INST_LIBDIR = $(INST_LIB)/BSD INST_ARCHLIBDIR = $(INST_ARCHLIB)/BSD INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT) INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT) INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT) INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT) INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs EXPORT_LIST = PERL_ARCHIVE = PERL_ARCHIVE_AFTER = TO_INST_PM = Resource.pm PM_TO_BLIB = Resource.pm \ blib/lib/BSD/Resource.pm # --- MakeMaker tool_autosplit section: # Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit; autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;' # --- MakeMaker tool_xsubpp section: XSUBPPDIR = /usr/lib/perl5/5.8.0/ExtUtils XSUBPP = $(XSUBPPDIR)/xsubpp XSPROTOARG = XSUBPPDEPS = $(XSUBPPDIR)/typemap $(XSUBPP) XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap XSUBPP_EXTRA_ARGS = # --- MakeMaker tools_other section: SHELL = /bin/sh' shar=' CHMOD = chmod CP = cp LD = gcc MV = mv NOOP = $(SHELL) -c true RM_F = rm -f RM_RF = rm -rf TEST_F = test -f TOUCH = touch UMASK_NULL = umask 0 DEV_NULL = > /dev/null 2>&1 # The following is a portable way to say mkdir -p # To see which directories are created, change the if 0 to if 1 MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath # This helps us to minimize the effect of the .exists files A yet # better solution would be to have a stable file in the perl # distribution with a timestamp of zero. But this solution doesn't # need any changes to the core distribution and works with older perls EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime # Here we warn users that an old packlist file was found somewhere, # and that they should call some uninstall routine WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \ -e 'print "WARNING: I have found an old package in\n";' \ -e 'print "\t$$ARGV[0].\n";' \ -e 'print "Please make sure the two installations are not conflicting\n";' UNINST=0 VERBINST=0 MOD_INSTALL = $(PERL) "-I$(INST_LIB)" "-I$(PERL_LIB)" "-MExtUtils::Install" \ -e "install({@ARGV},'$(VERBINST)',0,'$(UNINST)');" DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \ -e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<", $$arg=shift, "|", $$arg, ">";' \ -e 'print "=over 4";' \ -e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print "C<$$key: $$val>";}' \ -e 'print "=back";' UNINSTALL = $(PERLRUN) "-MExtUtils::Install" \ -e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please check the";' \ -e 'print " packlist above carefully.\n There may be errors. Remove the";' \ -e 'print " appropriate files manually.\n Sorry for the inconveniences.\n"' # --- MakeMaker dist section: ZIPFLAGS = -r TO_UNIX = @$(NOOP) TAR = tar POSTOP = @$(NOOP) ZIP = zip DIST_DEFAULT = tardist CI = ci -u SHAR = shar COMPRESS = gzip DIST_CP = best PREOP = @$(NOOP) TARFLAGS = cvf DISTVNAME = $(DISTNAME)-$(VERSION) SUFFIX = .gz RCS_LABEL = rcs -Nv$(VERSION_SYM): -q # --- MakeMaker macro section: # --- MakeMaker depend section: # --- MakeMaker cflags section: CCFLAGS = -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm OPTIMIZE = PERLTYPE = MPOLLUTE = # --- MakeMaker const_loadlibs section: # BSD::Resource might depend on some other libraries: # See ExtUtils::Liblist for details # LD_RUN_PATH = # --- MakeMaker const_cccmd section: CCCMD = $(CC) -c $(PASTHRU_INC) $(INC) \ $(CCFLAGS) $(OPTIMIZE) \ $(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \ $(XS_DEFINE_VERSION) # --- MakeMaker post_constants section: # --- MakeMaker pasthru section: PASTHRU = LIB="$(LIB)"\ LIBPERL_A="$(LIBPERL_A)"\ LINKTYPE="$(LINKTYPE)"\ PREFIX="$(PREFIX)"\ OPTIMIZE="$(OPTIMIZE)"\ PASTHRU_DEFINE="$(PASTHRU_DEFINE)"\ PASTHRU_INC="$(PASTHRU_INC)" # --- MakeMaker c_o section: .c.i: gcc -E -c $(PASTHRU_INC) $(INC) \ $(CCFLAGS) $(OPTIMIZE) \ $(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \ $(XS_DEFINE_VERSION) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c > $*.i .c.s: $(CCCMD) -S $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c .c$(OBJ_EXT): $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c .C$(OBJ_EXT): $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.C .cpp$(OBJ_EXT): $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cpp .cxx$(OBJ_EXT): $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cxx .cc$(OBJ_EXT): $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cc # --- MakeMaker xs_c section: .xs.c: $(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $(XSUBPP_EXTRA_ARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c # --- MakeMaker xs_o section: .xs$(OBJ_EXT): $(PERLRUN) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c # --- MakeMaker top_targets section: all :: pure_all manifypods @$(NOOP) pure_all :: config pm_to_blib subdirs linkext @$(NOOP) subdirs :: $(MYEXTLIB) @$(NOOP) config :: Makefile $(INST_LIBDIR)/.exists @$(NOOP) config :: $(INST_ARCHAUTODIR)/.exists @$(NOOP) config :: $(INST_AUTODIR)/.exists @$(NOOP) $(INST_AUTODIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h @$(MKPATH) $(INST_AUTODIR) @$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h $(INST_AUTODIR)/.exists -@$(CHMOD) $(PERM_RWX) $(INST_AUTODIR) $(INST_LIBDIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h @$(MKPATH) $(INST_LIBDIR) @$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h $(INST_LIBDIR)/.exists -@$(CHMOD) $(PERM_RWX) $(INST_LIBDIR) $(INST_ARCHAUTODIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h @$(MKPATH) $(INST_ARCHAUTODIR) @$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h $(INST_ARCHAUTODIR)/.exists -@$(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR) config :: $(INST_MAN3DIR)/.exists @$(NOOP) $(INST_MAN3DIR)/.exists :: /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h @$(MKPATH) $(INST_MAN3DIR) @$(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h $(INST_MAN3DIR)/.exists -@$(CHMOD) $(PERM_RWX) $(INST_MAN3DIR) help: perldoc ExtUtils::MakeMaker # --- MakeMaker linkext section: linkext :: $(LINKTYPE) @$(NOOP) # --- MakeMaker dlsyms section: # --- MakeMaker dynamic section: ## $(INST_PM) has been moved to the all: target. ## It remains here for awhile to allow for old usage: "make dynamic" #dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM) dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) @$(NOOP) # --- MakeMaker dynamic_bs section: BOOTSTRAP = Resource.bs # As Mkbootstrap might not write a file (if none is required) # we use touch to prevent make continually trying to remake it. # The DynaLoader only reads a non-empty file. $(BOOTSTRAP): Makefile $(INST_ARCHAUTODIR)/.exists @echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))" @$(PERLRUN) \ "-MExtUtils::Mkbootstrap" \ -e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');" @$(TOUCH) $(BOOTSTRAP) $(CHMOD) $(PERM_RW) $@ $(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists @rm -rf $(INST_BOOT) -cp $(BOOTSTRAP) $(INST_BOOT) $(CHMOD) $(PERM_RW) $@ # --- MakeMaker dynamic_lib section: # This section creates the dynamically loadable $(INST_DYNAMIC) # from $(OBJECT) and possibly $(MYEXTLIB). ARMAYBE = : OTHERLDFLAGS = INST_DYNAMIC_DEP = $(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists $(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP) $(RM_F) $@ LD_RUN_PATH="$(LD_RUN_PATH)" $(LD) $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) -o $@ $(MYEXTLIB) $(PERL_ARCHIVE) $(LDLOADLIBS) $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST) $(CHMOD) $(PERM_RWX) $@ # --- MakeMaker static section: ## $(INST_PM) has been moved to the all: target. ## It remains here for awhile to allow for old usage: "make static" #static :: Makefile $(INST_STATIC) $(INST_PM) static :: Makefile $(INST_STATIC) @$(NOOP) # --- MakeMaker static_lib section: $(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists $(RM_RF) $@ $(FULL_AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@ $(CHMOD) $(PERM_RWX) $@ @echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld # --- MakeMaker manifypods section: POD2MAN_EXE = /usr/bin/pod2man POD2MAN = $(PERL) -we '%m=@ARGV;for (keys %m){' \ -e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M "Makefile";' \ -e 'print "Manifying $$m{$$_}\n";' \ -e 'system(q[$(PERLRUN) $(POD2MAN_EXE) ].qq[$$_>$$m{$$_}])==0 or warn "Couldn\047t install $$m{$$_}\n";' \ -e 'chmod(oct($(PERM_RW)), $$m{$$_}) or warn "chmod $(PERM_RW) $$m{$$_}: $$!\n";}' manifypods : pure_all Resource.pm @$(POD2MAN) \ Resource.pm \ $(INST_MAN3DIR)/BSD::Resource.$(MAN3EXT) # --- MakeMaker processPL section: # --- MakeMaker installbin section: # --- MakeMaker subdirs section: # none # --- MakeMaker clean section: # Delete temporary files but do not touch installed files. We don't delete # the Makefile here so a later make realclean still has a makefile to use. clean :: -rm -rf Resource.c ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def lib$(BASEEXT).def $(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core -mv Makefile Makefile.old $(DEV_NULL) # --- MakeMaker realclean section: # Delete temporary files (via clean) and also delete installed files realclean purge :: clean rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR) rm -rf $(DISTVNAME) rm -f $(INST_DYNAMIC) $(INST_BOOT) rm -f $(INST_STATIC) rm -f blib/lib/BSD/Resource.pm rm -rf Makefile Makefile.old # --- MakeMaker dist_basics section: distclean :: realclean distcheck $(NOECHO) $(NOOP) distcheck : $(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck skipcheck : $(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck manifest : $(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest veryclean : realclean $(RM_F) *~ *.orig */*~ */*.orig # --- MakeMaker dist_core section: dist : $(DIST_DEFAULT) @$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \ -e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "Makefile";' tardist : $(DISTVNAME).tar$(SUFFIX) zipdist : $(DISTVNAME).zip $(DISTVNAME).tar$(SUFFIX) : distdir $(PREOP) $(TO_UNIX) $(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME) $(RM_RF) $(DISTVNAME) $(COMPRESS) $(DISTVNAME).tar $(POSTOP) $(DISTVNAME).zip : distdir $(PREOP) $(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME) $(RM_RF) $(DISTVNAME) $(POSTOP) uutardist : $(DISTVNAME).tar$(SUFFIX) uuencode $(DISTVNAME).tar$(SUFFIX) \ $(DISTVNAME).tar$(SUFFIX) > \ $(DISTVNAME).tar$(SUFFIX)_uu shdist : distdir $(PREOP) $(SHAR) $(DISTVNAME) > $(DISTVNAME).shar $(RM_RF) $(DISTVNAME) $(POSTOP) # --- MakeMaker dist_dir section: distdir : $(RM_RF) $(DISTVNAME) $(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \ -e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');" # --- MakeMaker dist_test section: disttest : distdir cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL cd $(DISTVNAME) && $(MAKE) $(PASTHRU) cd $(DISTVNAME) && $(MAKE) test $(PASTHRU) # --- MakeMaker dist_ci section: ci : $(PERLRUN) "-MExtUtils::Manifest=maniread" \ -e "@all = keys %{ maniread() };" \ -e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \ -e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL) @all");' # --- MakeMaker install section: install :: all pure_install doc_install install_perl :: all pure_perl_install doc_perl_install install_site :: all pure_site_install doc_site_install install_vendor :: all pure_vendor_install doc_vendor_install pure_install :: pure_$(INSTALLDIRS)_install doc_install :: doc_$(INSTALLDIRS)_install @echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod pure__install : pure_site_install @echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site doc__install : doc_site_install @echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site pure_perl_install :: @$(MOD_INSTALL) \ read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \ write $(INSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \ $(INST_LIB) $(INSTALLPRIVLIB) \ $(INST_ARCHLIB) $(INSTALLARCHLIB) \ $(INST_BIN) $(INSTALLBIN) \ $(INST_SCRIPT) $(INSTALLSCRIPT) \ $(INST_MAN1DIR) $(INSTALLMAN1DIR) \ $(INST_MAN3DIR) $(INSTALLMAN3DIR) @$(WARN_IF_OLD_PACKLIST) \ $(SITEARCHEXP)/auto/$(FULLEXT) pure_site_install :: @$(MOD_INSTALL) \ read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \ write $(INSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \ $(INST_LIB) $(INSTALLSITELIB) \ $(INST_ARCHLIB) $(INSTALLSITEARCH) \ $(INST_BIN) $(INSTALLSITEBIN) \ $(INST_SCRIPT) $(INSTALLSCRIPT) \ $(INST_MAN1DIR) $(INSTALLSITEMAN1DIR) \ $(INST_MAN3DIR) $(INSTALLSITEMAN3DIR) @$(WARN_IF_OLD_PACKLIST) \ $(PERL_ARCHLIB)/auto/$(FULLEXT) pure_vendor_install :: @$(MOD_INSTALL) \ $(INST_LIB) $(INSTALLVENDORLIB) \ $(INST_ARCHLIB) $(INSTALLVENDORARCH) \ $(INST_BIN) $(INSTALLVENDORBIN) \ $(INST_SCRIPT) $(INSTALLSCRIPT) \ $(INST_MAN1DIR) $(INSTALLVENDORMAN1DIR) \ $(INST_MAN3DIR) $(INSTALLVENDORMAN3DIR) doc_perl_install :: -@$(MKPATH) $(INSTALLARCHLIB) -@$(DOC_INSTALL) \ "Module" "$(NAME)" \ "installed into" "$(INSTALLPRIVLIB)" \ LINKTYPE "$(LINKTYPE)" \ VERSION "$(VERSION)" \ EXE_FILES "$(EXE_FILES)" \ >> $(INSTALLARCHLIB)/perllocal.pod doc_site_install :: -@$(MKPATH) $(INSTALLARCHLIB) -@$(DOC_INSTALL) \ "Module" "$(NAME)" \ "installed into" "$(INSTALLSITELIB)" \ LINKTYPE "$(LINKTYPE)" \ VERSION "$(VERSION)" \ EXE_FILES "$(EXE_FILES)" \ >> $(INSTALLSITEARCH)/perllocal.pod doc_vendor_install :: uninstall :: uninstall_from_$(INSTALLDIRS)dirs uninstall_from_perldirs :: @$(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist uninstall_from_sitedirs :: @$(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist # --- MakeMaker force section: # Phony target to force checking subdirectories. FORCE: @$(NOOP) # --- MakeMaker perldepend section: PERL_HDRS = \ $(PERL_INC)/EXTERN.h \ $(PERL_INC)/INTERN.h \ $(PERL_INC)/XSUB.h \ $(PERL_INC)/av.h \ $(PERL_INC)/cc_runtime.h \ $(PERL_INC)/config.h \ $(PERL_INC)/cop.h \ $(PERL_INC)/cv.h \ $(PERL_INC)/dosish.h \ $(PERL_INC)/embed.h \ $(PERL_INC)/embedvar.h \ $(PERL_INC)/fakethr.h \ $(PERL_INC)/form.h \ $(PERL_INC)/gv.h \ $(PERL_INC)/handy.h \ $(PERL_INC)/hv.h \ $(PERL_INC)/intrpvar.h \ $(PERL_INC)/iperlsys.h \ $(PERL_INC)/keywords.h \ $(PERL_INC)/mg.h \ $(PERL_INC)/nostdio.h \ $(PERL_INC)/op.h \ $(PERL_INC)/opcode.h \ $(PERL_INC)/opnames.h \ $(PERL_INC)/patchlevel.h \ $(PERL_INC)/perl.h \ $(PERL_INC)/perlapi.h \ $(PERL_INC)/perlio.h \ $(PERL_INC)/perlsdio.h \ $(PERL_INC)/perlsfio.h \ $(PERL_INC)/perlvars.h \ $(PERL_INC)/perly.h \ $(PERL_INC)/pp.h \ $(PERL_INC)/pp_proto.h \ $(PERL_INC)/proto.h \ $(PERL_INC)/regcomp.h \ $(PERL_INC)/regexp.h \ $(PERL_INC)/regnodes.h \ $(PERL_INC)/scope.h \ $(PERL_INC)/sv.h \ $(PERL_INC)/thrdvar.h \ $(PERL_INC)/thread.h \ $(PERL_INC)/unixish.h \ $(PERL_INC)/utf8.h \ $(PERL_INC)/util.h \ $(PERL_INC)/warnings.h $(OBJECT) : $(PERL_HDRS) Resource.c : $(XSUBPPDEPS) # --- MakeMaker makefile section: $(OBJECT) : $(FIRST_MAKEFILE) # We take a very conservative approach here, but it\'s worth it. # We move Makefile to Makefile.old here to avoid gnu make looping. Makefile : Makefile.PL $(CONFIGDEP) @echo "Makefile out-of-date with respect to $?" @echo "Cleaning current config before rebuilding Makefile..." -@$(RM_F) Makefile.old -@$(MV) Makefile Makefile.old -$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP) $(PERLRUN) Makefile.PL @echo "==> Your Makefile has been rebuilt. <==" @echo "==> Please rerun the make command. <==" false # --- MakeMaker staticmake section: # --- MakeMaker makeaperl section --- MAP_TARGET = perl FULLPERL = /usr/bin/perl $(MAP_TARGET) :: static $(MAKE_APERL_FILE) $(MAKE) -f $(MAKE_APERL_FILE) $@ $(MAKE_APERL_FILE) : $(FIRST_MAKEFILE) @echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET) @$(PERLRUNINST) \ Makefile.PL DIR= \ MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \ MAKEAPERL=1 NORECURS=1 CCCDLFLAGS= # --- MakeMaker test section: TEST_VERBOSE=0 TEST_TYPE=test_$(LINKTYPE) TEST_FILE = test.pl TEST_FILES = t/*.t TESTDB_SW = -d testdb :: testdb_$(LINKTYPE) test :: $(TEST_TYPE) test_dynamic :: pure_all PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-e" "test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) testdb_dynamic :: pure_all PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) test_ : test_dynamic test_static :: pure_all $(MAP_TARGET) PERL_DL_NONLAZY=1 ./$(MAP_TARGET) "-MExtUtils::Command::MM" "-e" "test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) testdb_static :: pure_all $(MAP_TARGET) PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) # --- MakeMaker ppd section: # Creates a PPD (Perl Package Description) for a binary distribution. ppd: @$(PERL) -e "print qq{<SOFTPKG NAME=\"$(DISTNAME)\" VERSION=\"1,25,0,0\">\n\t<TITLE>$(DISTNAME)</TITLE>\n\t<ABSTRACT></ABSTRACT>\n\t<AUTHOR></AUTHOR>\n}" > $(DISTNAME).ppd @$(PERL) -e "print qq{\t<IMPLEMENTATION>\n}" >> $(DISTNAME).ppd @$(PERL) -e "print qq{\t\t<OS NAME=\"$(OSNAME)\" />\n\t\t<ARCHITECTURE NAME=\"i386-linux-thread-multi\" />\n\t\t<CODEBASE HREF=\"\" />\n\t</IMPLEMENTATION>\n</SOFTPKG>\n}" >> $(DISTNAME).ppd # --- MakeMaker pm_to_blib section: pm_to_blib: $(TO_INST_PM) @$(PERLRUNINST) "-MExtUtils::Install" \ -e "pm_to_blib({qw{Resource.pm blib/lib/BSD/Resource.pm}},'$(INST_LIB)/auto','$(PM_FILTER)')" @$(TOUCH) $@ # --- MakeMaker selfdocument section: # --- MakeMaker postamble section: # End.
Subject: Re: [rt.cpan.org #18684] perl Makefile.PL error
Date: Thu, 13 Apr 2006 18:29:54 +0300
To: bug-BSD-Resource@rt.cpan.org
From: Jarkko Hietaniemi <jhietaniemi@gmail.com>
Guest via RT wrote:
Show quoted text
> Wed Apr 12 13:38:04 2006: Request 18684 was acted upon. > Transaction: Ticket created by guest > Queue: BSD-Resource > Subject: perl Makefile.PL error > Owner: Nobody > Requestors: eschnoor@schnoor.com > Status: new > Ticket <URL: http://rt.cpan.org/Ticket/Display.html?id=18684 > > > > When I try to insatll I get the following: > > $ perl Makefile.PL > > Configuring BSD::Resource... > > Checking whether you have certain header files... > (trying first the CC from your environment) > You do have <sys/resource.h>. Excellent. > Checking to see whether you have rlim_t... > You seem to have rlim_t defined (which is nice). > > Writing Makefile for BSD::Resource > > Done configuring BSD::Resource. > > Now you may issue 'make'. Do not forget also 'make test'. > If some tests fail, please rerun the tests (see INSTALL). > > ~/BUP1/BSD-Resource-1.25 > $ make > Makefile:84: *** missing separator. Stop.
export LC_ALL=C perl Makefile.PL make all test install


This service runs on Request Tracker, is sponsored by The Perl Foundation, and maintained by Best Practical Solutions.

Please report any issues with rt.cpan.org to rt-cpan-admin@bestpractical.com.