Preferred bug tracker

Please visit the preferred bug tracker to report your issue.

This queue is for tickets about the B-C CPAN distribution.

Report information
The Basics
Id:
120162
Status:
rejected
Priority:
Low/Low
Queue:

People
Owner:
Nobody in particular
Requestors:
jkeenan [...] cpan.org
Cc:
AdminCc:

BugTracker
Severity:
(no value)
Broken in:
1.54
Fixed in:
(no value)



Subject: B::C fails to build against perl 5 blead
[Reporting this issue here as http://code.google.com/p/perl-compiler/issues is now a read-only archive.] Today I attempted to install B-C version 1.54 via 'cpanm' against a debugging build of perl 5 blead on Ubuntu Linux 16.04 LTS. Compilation failed during processing of bytecode.c. (This failure differs from that on 5.24.1 also reported today.) Please find attached the build.log (with output for successfully installed prerequisites trimmed). Thank you very much. Jim Keenan
Subject: b-c-1.54-perl-5.25.10-debugging.trimmed.build.log
cpanm (App::cpanminus) 1.7042 on perl 5.025010 built for x86_64-linux Work directory is /home/jkeenan/.cpanm/work/1486670810.24261 You have make /usr/bin/make You have /usr/bin/wget You have /bin/tar: tar (GNU tar) 1.28 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. You have /usr/bin/unzip Searching B::C () on cpanmetadb ... --> Working on B::C Fetching http://www.cpan.org/authors/id/R/RU/RURBAN/B-C-1.54.tar.gz -> OK Unpacking B-C-1.54.tar.gz Entering B-C-1.54 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.24) Configuring B-C-1.54 Running Makefile.PL Warning: Perl handling of new unicode identifiers - package and symbol names - without proper TR39 handling is considered a security risc and is not fully supported. See http://websec.github.io/unicode-security-guide/ Check your code for syntax spoofs, confusables, strip \0 from package names. Enable use warnings 'syscalls'. Warning: prerequisite B::Flags 0.15 not found. Warning: prerequisite IPC::Run 0 not found. Warning: prerequisite Opcodes 0 not found. Checking if your kit is complete... Looks good Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Empty %B::C::Config::Config at lib/B/C.pm line 21. Generating a Unix-style Makefile Writing Makefile for B::C Writing MYMETA.yml and MYMETA.json -> OK Checking dependencies from MYMETA.json ... Checking if you have B::Flags 0.15 ... No Checking if you have ExtUtils::Embed 1.25 ... Yes (1.34) Checking if you have Time::HiRes 0 ... Yes (1.9741) Checking if you have Opcodes 0 ... No Checking if you have IPC::Run 0 ... No Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.24) ==> Found dependencies: B::Flags, Opcodes, IPC::Run Searching B::Flags (0.15) on cpanmetadb ... --> Working on B::Flags [snip] Successfully installed B-Flags-0.16 [snip] --> Working on Opcodes [snip] Successfully installed Opcodes-0.14 [snip] --> Working on IPC::Run [snip] Successfully installed IPC-Run-0.94 [snip] Building and testing B-C-1.54 "/home/jkeenan/testing/blead/bin/perl" bytecode.pl cp lib/B/Asmdata.pm blib/lib/B/Asmdata.pm cp lib/B/Disassembler.pm blib/lib/B/Disassembler.pm cp lib/B/Assembler.pm blib/lib/B/Assembler.pm cp lib/B/Bblock.pm blib/lib/B/Bblock.pm cp lib/B/Bytecode.pm blib/lib/B/Bytecode.pm cp perloptree.pod blib/lib/B/perloptree.pod cp lib/B/C.pm blib/lib/B/C.pm cp lib/B/Stackobj.pm blib/lib/B/Stackobj.pm cp perlcompile.pod blib/lib/B/perlcompile.pod cp lib/B/Bytecode56.pm blib/lib/B/Bytecode56.pm cp lib/B/C/Config.pm blib/lib/B/C/Config.pm cp lib/B/CC.pm blib/lib/B/CC.pm make[1]: Entering directory '/home/jkeenan/.cpanm/work/1486670810.24261/B-C-1.54/ByteLoader' cp BcVersions.pod ../blib/lib/BcVersions.pod cp ByteLoader.pm ../blib/lib/ByteLoader.pm Running Mkbootstrap for ByteLoader () chmod 644 "ByteLoader.bs" "/home/jkeenan/testing/blead/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ByteLoader.bs ../blib/arch/auto/ByteLoader/ByteLoader.bs 644 cc -c -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"0.11\" -DXS_VERSION=\"0.11\" -fPIC "-I/home/jkeenan/testing/blead/lib/perl5/5.25.10/x86_64-linux/CORE" byterun.c byterun.c: In function ‘byterun’: byterun.c:1838:42: error: ‘union _xnvu’ has no member named ‘xpad_cop_seq’ ((XPVNV*)(SvANY(bstate->bs_sv)))->xnv_u.xpad_cop_seq.xlow = arg; ^ byterun.c:1848:42: error: ‘union _xnvu’ has no member named ‘xpad_cop_seq’ ((XPVNV*)(SvANY(bstate->bs_sv)))->xnv_u.xpad_cop_seq.xhigh = arg; ^ Makefile:335: recipe for target 'byterun.o' failed make[1]: *** [byterun.o] Error 1 make[1]: Leaving directory '/home/jkeenan/.cpanm/work/1486670810.24261/B-C-1.54/ByteLoader' Makefile:596: recipe for target 'subdirs' failed make: *** [subdirs] Error 2 -> FAIL Installing B::C failed. See /home/jkeenan/.cpanm/work/1486670810.24261/build.log for details. Retry with --force to force install it. 3 distributions installed
Subject: perl-5.25.10-debugging-V.txt
Summary of my perl5 (revision 5 version 25 subversion 10) configuration: Commit id: 7f8a472bea19cb7746a1be14c8fe5cfde32c6363 Platform: osname=linux osvers=4.4.0-62-generic archname=x86_64-linux uname='linux zareason 4.4.0-62-generic #83-ubuntu smp wed jan 18 14:10:15 utc 2017 x86_64 x86_64 x86_64 gnulinux ' config_args='-des -Dusedevel -Uversiononly -Dprefix=/home/jkeenan/testing/blead -Dman1dir=none -Dman3dir=none -DDEBUGGING' hint=recommended useposix=true d_sigaction=define useithreads=undef usemultiplicity=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n bincompat5005=undef Compiler: cc='cc' ccflags ='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' optimize='-O2 -g' cppflags='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include' ccversion='' gccversion='5.4.0 20160609' gccosandvers='' intsize=4 longsize=8 ptrsize=8 doublesize=8 byteorder=12345678 doublekind=3 d_longlong=define longlongsize=8 d_longdbl=define longdblsize=16 longdblkind=3 ivtype='long' ivsize=8 nvtype='double' nvsize=8 Off_t='off_t' lseeksize=8 alignbytes=8 prototype=define Linker and Libraries: ld='cc' ldflags =' -fstack-protector-strong -L/usr/local/lib' libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/5/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64 libs=-lpthread -lnsl -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc libc=libc-2.23.so so=so useshrplib=false libperl=libperl.a gnulibc_version='2.23' Dynamic Linking: dlsrc=dl_dlopen.xs dlext=so d_dlsymun=undef ccdlflags='-Wl,-E' cccdlflags='-fPIC' lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong' Characteristics of this binary (from libperl): Compile-time options: DEBUGGING HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP PERL_OP_PARENT PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO USE_PERL_ATOF Built under linux Compiled at Feb 9 2017 14:58:59 %ENV: PERLBREW_BASHRC_VERSION="0.67" PERLBREW_HOME="/home/jkeenan/.perlbrew" PERLBREW_MANPATH="/home/jkeenan/perl5/perlbrew/perls/perl-5.24.1/man" PERLBREW_PATH="/home/jkeenan/perl5/perlbrew/bin:/home/jkeenan/perl5/perlbrew/perls/perl-5.24.1/bin" PERLBREW_PERL="perl-5.24.1" PERLBREW_ROOT="/home/jkeenan/perl5/perlbrew" PERLBREW_VERSION="0.67" PERL_WORKDIR="/home/jkeenan/gitwork/perl" @INC: lib /home/jkeenan/testing/blead/lib/perl5/site_perl/5.25.10/x86_64-linux /home/jkeenan/testing/blead/lib/perl5/site_perl/5.25.10 /home/jkeenan/testing/blead/lib/perl5/5.25.10/x86_64-linux /home/jkeenan/testing/blead/lib/perl5/5.25.10 .
Subject: Re: [rt.cpan.org #120162] B::C fails to build against perl 5 blead
Date: Thu, 9 Feb 2017 21:42:18 +0100
To: bug-B-C@rt.cpan.org
From: Reini Urban <reini.urban@gmail.com>
Sure I know. See the v526 branch, where these issues are processed. B::C only supports up to 5.24. For 5.26: 1.54_17 which is on master and cperl can work with most of 5.26 already, just not the changed signatures by 5.25.x (the 3 new ops). cperl 5.26 will work fine, because this has B::C included. cperl 5.26 did not use the changed and slow signature ops. Reini Urban rurban@cpan.org
Show quoted text
> On Feb 9, 2017, at 9:36 PM, James E Keenan via RT <bug-B-C@rt.cpan.org> wrote: > > Thu Feb 09 15:36:28 2017: Request 120162 was acted upon. > Transaction: Ticket created by JKEENAN > Queue: B-C > Subject: B::C fails to build against perl 5 blead > Broken in: 1.54 > Severity: (no value) > Owner: Nobody > Requestors: jkeenan@cpan.org > Status: new > Ticket <URL: https://rt.cpan.org/Ticket/Display.html?id=120162 > > > > [Reporting this issue here as http://code.google.com/p/perl-compiler/issues is now a read-only archive.] > > Today I attempted to install B-C version 1.54 via 'cpanm' against a debugging build of perl 5 blead on Ubuntu Linux 16.04 LTS. Compilation failed during processing of bytecode.c. (This failure differs from that on 5.24.1 also reported today.) > > Please find attached the build.log (with output for successfully installed prerequisites trimmed). > > Thank you very much. > Jim Keenan > > > > cpanm (App::cpanminus) 1.7042 on perl 5.025010 built for x86_64-linux > Work directory is /home/jkeenan/.cpanm/work/1486670810.24261 > You have make /usr/bin/make > You have /usr/bin/wget > You have /bin/tar: tar (GNU tar) 1.28 > Copyright (C) 2014 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > Written by John Gilmore and Jay Fenlason. > You have /usr/bin/unzip > Searching B::C () on cpanmetadb ... > --> Working on B::C > Fetching http://www.cpan.org/authors/id/R/RU/RURBAN/B-C-1.54.tar.gz > -> OK > Unpacking B-C-1.54.tar.gz > Entering B-C-1.54 > Checking configure dependencies from META.json > Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.24) > Configuring B-C-1.54 > Running Makefile.PL > Warning: > Perl handling of new unicode identifiers - package and symbol names - > without proper TR39 handling is considered a security risc and is not fully supported. > See http://websec.github.io/unicode-security-guide/ > > Check your code for syntax spoofs, confusables, strip \0 from package names. > Enable use warnings 'syscalls'. > Warning: prerequisite B::Flags 0.15 not found. > Warning: prerequisite IPC::Run 0 not found. > Warning: prerequisite Opcodes 0 not found. > Checking if your kit is complete... > Looks good > Writing MYMETA.yml and MYMETA.json > Writing MYMETA.yml and MYMETA.json > Empty %B::C::Config::Config at lib/B/C.pm line 21. > Generating a Unix-style Makefile > Writing Makefile for B::C > Writing MYMETA.yml and MYMETA.json > -> OK > Checking dependencies from MYMETA.json ... > Checking if you have B::Flags 0.15 ... No > Checking if you have ExtUtils::Embed 1.25 ... Yes (1.34) > Checking if you have Time::HiRes 0 ... Yes (1.9741) > Checking if you have Opcodes 0 ... No > Checking if you have IPC::Run 0 ... No > Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.24) > ==> Found dependencies: B::Flags, Opcodes, IPC::Run > Searching B::Flags (0.15) on cpanmetadb ... > --> Working on B::Flags > [snip] > Successfully installed B-Flags-0.16 > [snip] > --> Working on Opcodes > [snip] > Successfully installed Opcodes-0.14 > [snip] > --> Working on IPC::Run > [snip] > Successfully installed IPC-Run-0.94 > [snip] > Building and testing B-C-1.54 > "/home/jkeenan/testing/blead/bin/perl" bytecode.pl > cp lib/B/Asmdata.pm blib/lib/B/Asmdata.pm > cp lib/B/Disassembler.pm blib/lib/B/Disassembler.pm > cp lib/B/Assembler.pm blib/lib/B/Assembler.pm > cp lib/B/Bblock.pm blib/lib/B/Bblock.pm > cp lib/B/Bytecode.pm blib/lib/B/Bytecode.pm > cp perloptree.pod blib/lib/B/perloptree.pod > cp lib/B/C.pm blib/lib/B/C.pm > cp lib/B/Stackobj.pm blib/lib/B/Stackobj.pm > cp perlcompile.pod blib/lib/B/perlcompile.pod > cp lib/B/Bytecode56.pm blib/lib/B/Bytecode56.pm > cp lib/B/C/Config.pm blib/lib/B/C/Config.pm > cp lib/B/CC.pm blib/lib/B/CC.pm > make[1]: Entering directory '/home/jkeenan/.cpanm/work/1486670810.24261/B-C-1.54/ByteLoader' > cp BcVersions.pod ../blib/lib/BcVersions.pod > cp ByteLoader.pm ../blib/lib/ByteLoader.pm > Running Mkbootstrap for ByteLoader () > chmod 644 "ByteLoader.bs" > "/home/jkeenan/testing/blead/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ByteLoader.bs ../blib/arch/auto/ByteLoader/ByteLoader.bs 644 > cc -c -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"0.11\" -DXS_VERSION=\"0.11\" -fPIC "-I/home/jkeenan/testing/blead/lib/perl5/5.25.10/x86_64-linux/CORE" byterun.c > byterun.c: In function ‘byterun’: > byterun.c:1838:42: error: ‘union _xnvu’ has no member named ‘xpad_cop_seq’ > ((XPVNV*)(SvANY(bstate->bs_sv)))->xnv_u.xpad_cop_seq.xlow = arg; > ^ > byterun.c:1848:42: error: ‘union _xnvu’ has no member named ‘xpad_cop_seq’ > ((XPVNV*)(SvANY(bstate->bs_sv)))->xnv_u.xpad_cop_seq.xhigh = arg; > ^ > Makefile:335: recipe for target 'byterun.o' failed > make[1]: *** [byterun.o] Error 1 > make[1]: Leaving directory '/home/jkeenan/.cpanm/work/1486670810.24261/B-C-1.54/ByteLoader' > Makefile:596: recipe for target 'subdirs' failed > make: *** [subdirs] Error 2 > -> FAIL Installing B::C failed. See /home/jkeenan/.cpanm/work/1486670810.24261/build.log for details. Retry with --force to force install it. > 3 distributions installed > Summary of my perl5 (revision 5 version 25 subversion 10) configuration: > Commit id: 7f8a472bea19cb7746a1be14c8fe5cfde32c6363 > Platform: > osname=linux > osvers=4.4.0-62-generic > archname=x86_64-linux > uname='linux zareason 4.4.0-62-generic #83-ubuntu smp wed jan 18 14:10:15 utc 2017 x86_64 x86_64 x86_64 gnulinux ' > config_args='-des -Dusedevel -Uversiononly -Dprefix=/home/jkeenan/testing/blead -Dman1dir=none -Dman3dir=none -DDEBUGGING' > hint=recommended > useposix=true > d_sigaction=define > useithreads=undef > usemultiplicity=undef > use64bitint=define > use64bitall=define > uselongdouble=undef > usemymalloc=n > bincompat5005=undef > Compiler: > cc='cc' > ccflags ='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' > optimize='-O2 -g' > cppflags='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include' > ccversion='' > gccversion='5.4.0 20160609' > gccosandvers='' > intsize=4 > longsize=8 > ptrsize=8 > doublesize=8 > byteorder=12345678 > doublekind=3 > d_longlong=define > longlongsize=8 > d_longdbl=define > longdblsize=16 > longdblkind=3 > ivtype='long' > ivsize=8 > nvtype='double' > nvsize=8 > Off_t='off_t' > lseeksize=8 > alignbytes=8 > prototype=define > Linker and Libraries: > ld='cc' > ldflags =' -fstack-protector-strong -L/usr/local/lib' > libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/5/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64 > libs=-lpthread -lnsl -ldb -ldl -lm -lcrypt -lutil -lc > perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc > libc=libc-2.23.so > so=so > useshrplib=false > libperl=libperl.a > gnulibc_version='2.23' > Dynamic Linking: > dlsrc=dl_dlopen.xs > dlext=so > d_dlsymun=undef > ccdlflags='-Wl,-E' > cccdlflags='-fPIC' > lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong' > > > Characteristics of this binary (from libperl): > Compile-time options: > DEBUGGING > HAS_TIMES > PERLIO_LAYERS > PERL_COPY_ON_WRITE > PERL_DONT_CREATE_GVSV > PERL_MALLOC_WRAP > PERL_OP_PARENT > PERL_PRESERVE_IVUV > PERL_USE_DEVEL > USE_64_BIT_ALL > USE_64_BIT_INT > USE_LARGE_FILES > USE_LOCALE > USE_LOCALE_COLLATE > USE_LOCALE_CTYPE > USE_LOCALE_NUMERIC > USE_LOCALE_TIME > USE_PERLIO > USE_PERL_ATOF > Built under linux > Compiled at Feb 9 2017 14:58:59 > %ENV: > PERLBREW_BASHRC_VERSION="0.67" > PERLBREW_HOME="/home/jkeenan/.perlbrew" > PERLBREW_MANPATH="/home/jkeenan/perl5/perlbrew/perls/perl-5.24.1/man" > PERLBREW_PATH="/home/jkeenan/perl5/perlbrew/bin:/home/jkeenan/perl5/perlbrew/perls/perl-5.24.1/bin" > PERLBREW_PERL="perl-5.24.1" > PERLBREW_ROOT="/home/jkeenan/perl5/perlbrew" > PERLBREW_VERSION="0.67" > PERL_WORKDIR="/home/jkeenan/gitwork/perl" > @INC: > lib > /home/jkeenan/testing/blead/lib/perl5/site_perl/5.25.10/x86_64-linux > /home/jkeenan/testing/blead/lib/perl5/site_perl/5.25.10 > /home/jkeenan/testing/blead/lib/perl5/5.25.10/x86_64-linux > /home/jkeenan/testing/blead/lib/perl5/5.25.10 > .

Message body not shown because it is not plain text.



This service runs on Request Tracker, is sponsored by The Perl Foundation, and maintained by Best Practical Solutions.

Please report any issues with rt.cpan.org to rt-cpan-admin@bestpractical.com.